How to add and set up a UBI Smart Parcel (eTower) Billing Account [Step-by-Step guide]
Modified on Wed, 28 Jun 2023 at 01:37 PM
When setting up your Clients in techShip, you will have to configure Billing Accounts to ship through them. These use a Baseline Account as a foundation, but their way to work could be different based on the Client's needs.
When setting Billing Accounts, you will be able to specify how it should work for that specific client, setting label references, packing slips usage, rate shopping, markups, WMS information updating and Carrier options such as the default service level, address validation, sender and return addresses, etc.
This article describes the procedure to set up a UBI Smart Parcel (eTower) billing account, while others are specifically written for other Carriers.
Feel free to follow the step-by-step guide written below or the video guide, as you prefer:
To set up a UBI Smart Parcel (eTower)billing account, define the following and then Save:
ADD THE ACCOUNT TO THE CLIENT PROFILE
1. Access Clients under the Maintenance menu
2. Click on the Client for which you wish to set up the billing account
3. Press Add Billing Account
4. Select the source account which will be used and Save
5. Edit the Billing account
SET UP THE GENERAL OPTIONS
The General Options tab is the same for every carrier. If you are already acquainted with it from previous setups, please configure it accordingly.
If this is your first time setup or you aren't acquainted to it, refer to the following article and once finished, return to this one to set up the carrier specific options:
The Carrier Options tab allows to set up basic and advanced features of your UBI Smart Parcel (eTower) billing account.
These are the key elements:
A) Default Service Code: Choose a service code to assign to imported orders which don’t have a service code or keep it if they have. You can choose between the service level thatcomes with the order, ECO mode which grabs the cheapest service or an arbitrary service level for all cases. You can go in depth on this subject in this article.
B) Currency Options
Freight Currency: Specify the currency code you will use from the list
Calculate declared value from lines: If checked, it calculates the declared value of the orders based on their SKU contents and information
Allow freight currency conversion: If checked, and the origin and destination currencies don't match, it sets the system to perform the conversion
C) Client Facility: Specify the Client Facility value for traceability purposes
D)Sender Name and Company: Specify the Sender Name and Company. You can also override the sender address (by default techShip will use the one defined on the source Carrier account) to an address different from the source. To do so, follow the steps from this article.
E) Dangerous goods fields: If required, set the battery material and packing type from the dropdowns
Press Save to apply the changes. If the information is valid, you'll be able to process orders through it.
Was this article helpful?
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
We appreciate your effort and will try to fix the article