This guide explains how to configure GLS Germany-specific settings in the Carrier tab of an Order.

A Carrier Tab configuration defines transaction-level behavior that applies only to the selected Order. These settings are enforced by the carrier and may vary depending on the selected service, shipment type, and accessorial configuration.

For a complete overview of supported carriers and related setup guides, refer to techSHIP supported Carriers - Master List [Guides List].

TABLE OF CONTENTS

• Prerequisites
• Carrier-Specific Options
• Next Steps

Prerequisites

Before configuring the Order's Carrier tab, ensure that:

• A GLS Germany Client (Billing) Account has been created. See: How to Add a GLS Germany Client (Billing) Account [Guide].

• Follow the configuration steps as described in: 05 - How to edit an order’s information - [Step-by-Step guide] using the values provided below.

Carrier-Specific Options

The Carrier tab contains the GLS Germany-specific configuration used to define operational behavior for this Order. Fields in this view are grouped visually to distinguish mandatory (red-highlighted items) and optional (blue-highlighted items) carrier-specific settings.

Service code: Select the GLS Germany service for this Order.

Ship date: Enter or select the shipment date for this Order.

Incoterm: Select the Incoterm for this Order when applicable.

Parcel shop ID: Enter the parcel shop identifier when the shipment is delivered to a parcel shop.

Safe place: Enter the safe place instructions when applicable.

Pick and ship: Enable this option when the Order must use the pick and ship option.

COD amount: Enter the COD amount when COD is configured for the shipment.

COD currency: Select the currency used for COD when COD is configured for the shipment.

To enable carrier-specific settings —and before continuing—, press Save.

Next Steps

You can now ship this Order through GLS Germany.